Evaluation of Grind and Groove (Next generation Concrete Surfaces) Pilot Project in California

This research report presents the results of tire/pavement noise, friction, drainability, and profile measurements performed on conventional diamond grind (CDG) and grind and groove (GnG) concrete pavement surface textures as a part of the California Department of Transportation (Caltrans) Quieter Pavement Research (QPR) study to investigate tire/pavement noise on concrete pavements. The On-board Sound Intensity (OBSI) method (AASHTO TP 76) was used to measure tire/pavement noise. Longitudinal profile data were collected at the same time as the OBSI data using an inertial profiler (ASTM E950) and were used to calculate the International Roughness Index (IRI). Friction was measured using the Towed Skid Trailer (ASTM E274) and the California Portable Skid Tester (CT 342), and estimated using the Circular Track Meter (ASTM E2157) and Dynamic Friction Tester (ASTM E1911). Drainability was measured using the Outflow Meter (ASTM E2380).